1 files changed, 0 insertions, 131 deletions
diff --git a/doc/Ledger.scriv/152.rtfd/TXT.rtf b/doc/Ledger.scriv/152.rtfd/TXT.rtf
deleted file mode 100644
index 926a552f..00000000
--- a/doc/Ledger.scriv/152.rtfd/TXT.rtf
+++ /dev/null
@@ -1,131 +0,0 @@
-{\rtf1\ansi\ansicpg1252\cocoartf949\cocoasubrtf460
-{\fonttbl\f0\fmodern\fcharset0 Courier;}
-{\colortbl;\red255\green255\blue255;}
-\pard\tx560\tx1120\tx1680\tx2240\tx2800\tx3360\tx3920\tx4480\tx5040\tx5600\tx6160\tx6720\sl264\slmult1\ql\qnatural\pardirnatural
-
-\f0\fs28 \cf0 The ledger file format is quite simple, but also very flexible.  It\
-supports many options, though typically the user can ignore most of\
-them.  They are summarized below.\
-\
-The initial character of each line determines what the line means, and\
-how it should be interpreted.  Allowable initial characters are:\
-\
-@table @code\
-@item NUMBER\
-A line beginning with a number denotes a transaction.  It may be followed\
-by any number of lines, each beginning with whitespace, to denote the\
-transaction's account postings.  The format of the first line is:\
-\
-@example\
-DATE[=EDATE] [*|!] [(CODE)] DESC\
-@end example\
-\
-If @samp\{*\} appears after the date (with optional effective date), it\
-indicates the transaction is ``cleared'', which can mean whatever the user\
-wants it t omean.  If @samp\{!\} appears after the date, it indicates d\
-the transaction is ``pending''; i.e., tentatively cleared from the user's\
-point of view, but not yet actually cleared.  If a @samp\{CODE\} appears\
-in parentheses, it may be used to indicate a check number, or the type\
-of the posting.  Following these is the payee, or a description of\
-the posting.\
-\
-The format of each following posting is:\
-\
-@example\
-  ACCOUNT  AMOUNT  [; NOTE]\
-@end example\
-\
-The @samp\{ACCOUNT\} may be surrounded by parentheses if it is a virtual\
-postings, or square brackets if it is a virtual postings that\
-must balance.  The @samp\{AMOUNT\} can be followed by a per-unit\
-posting cost, by specifying @samp\{@@ AMOUNT\}, or a complete\
-posting cost with @samp\{@@@@ AMOUNT\}.  Lastly, the @samp\{NOTE\} may\
-specify an actual and/or effective date for the posting by using\
-the syntax @samp\{[ACTUAL_DATE]\} or @samp\{[=EFFECTIVE_DATE]\} or\
-@samp\{[ACTUAL_DATE=EFFECtIVE_DATE]\}.\
-\
-@item =\
-An automated transaction.  A value expression must appear after the equal\
-sign.\
-\
-After this initial line there should be a set of one or more\
-postings, just as if it were normal transaction.  If the amounts of the\
-postings have no commodity, they will be applied as modifiers to\
-whichever real posting is matched by the value expression.\
-\
-@item ~\
-A period transaction.  A period expression must appear after the tilde.\
-\
-After this initial line there should be a set of one or more\
-postings, just as if it were normal transaction.\
-\
-@item !\
-A line beginning with an exclamation mark denotes a command directive.\
-It must be immediately followed by the command word.  The supported\
-commands are:\
-\
-@table @samp\
-@item !include\
-Include the stated ledger file.\
-\
-@item !account\
-The account name is given is taken to be the parent of all\
-postings that follow, until @samp\{!end\} is seen.\
-\
-@item !end\
-Ends an account block.\
-@end table\
-\
-@item ;\
-A line beginning with a colon indicates a comment, and is ignored.\
-\
-@item Y\
-If a line begins with a capital Y, it denotes the year used for all\
-subsequent transactions that give a date without a year.  The year should\
-appear immediately after the Y, for example: @samp\{Y2004\}.  This is\
-useful at the beginning of a file, to specify the year for that file.\
-If all transactions specify a year, however, this command has no effect.\
-\
-@item P\
-Specifies a historical price for a commodity.  These are usually found\
-in a pricing history file (see the @option\{-Q\} option).  The syntax\
-is:\
-@example\
-P DATE SYMBOL PRICE\
-@end example\
-\
-@item N SYMBOL\
-Indicates that pricing information is to be ignored for a given\
-symbol, nor will quotes ever be downloaded for that symbol.  Useful\
-with a home currency, such as the dollar ($).  It is recommended that\
-these pricing options be set in the price database file, which\
-defaults to @file\{~/.pricedb\}.  The syntax for this command is:\
-@example\
-N SYMBOL\
-@end example\
-\
-@item D AMOUNT\
-Specifies the default commodity to use, by specifying an amount in the\
-expected format.  The @command\{transaction\} command will use this commodity\
-as the default when none other can be determined.  This command may be\
-used multiple times, to set the default flags for different\
-commodities; whichever is seen last is used as the default commodity.\
-For example, to set US dollars as the default commodity, while also\
-setting the thousands flag and decimal flag for that commodity, use:\
-@example\
-D $1,000.00\
-@end example\
-\
-@item C AMOUNT1 = AMOUNT2\
-Specifies a commodity conversion, where the first amount is given to\
-be equivalent to the second amount.  The first amount should use the\
-decimal precision desired during reporting:\
-@example\
-C 1.00 Kb = 1024 bytes\
-@end example\
-\
-@item i, o, b, h\
-These four relate to timeclock support, which permits ledger to read\
-timelog files.  See the timeclock's documentation for more info on the\
-syntax of its timelog files.\
-@end table}
-\ No newline at end of file