| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
We ignored them, which is a bad default, as typically they imply
we can call anything in the table (and the table might change).
Instead, notice indirect calls during traversal, and force the user
to decide whether to ignore them or not.
This was only an issue in PostEmscripten because the other
user, Asyncify, already had indirect call analysis because it
needed it for other things.
Fixes a bug uncovered by #2619 and fixes the current binaryen
roll.
|
| |
|
|
|
|
|
| |
We should be looking at the import name when determining if a function
is an invoke function.
This is a precursor to re-landing the fix for
https://github.com/emscripten-core/emscripten/issues/9950.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add support for that section to the YAML layer, and add
code to update it.
The updating is slightly tricky - unlike .debug_ranges, the
size of entries is not fixed. So we can't just skip entries,
as the end marker is smaller than a normal entry. Instead,
replace now-invalid segments with (1, 1) which is of size
0 and so should be ignored by the debugger (we can't use
(0, 0) as that would be an end marker, and (-1, *) is
the special base marker).
In the future we probably do want to do this in a more
sophisticated manner, completely rewriting the indexes
into the section as well. For now though this should be
enough for when binaryen does not optimize (as we
don't move/reorder anything).
Note that this doesn't update the location description
(like where on the wasm expression stack the value is).
Again, that is correct for when binaryen doesn't
optimize, but for fully optimized builds we would need
to track things (which would be hard!).
Also clean up some code that uses "Extra" instead of
"Delimiter" that was missed before, and shorten some
unnecessarily long names.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
(#2614)
I missed this in the review of #2451 - this was doing quadratic
work, each function touched the entire array which is the size
of the functions.
This speeds up the pspdfkit testcase from the mailing list from
several minutes (15 on CI; I stopped measuring after 2 minutes
locally) to 5 seconds. I suspect this was not noticed earlier because
that testcase has a very large number of functions, which
hit this issue especially hard.
|
| |
|
|
|
|
| |
Chrome is currently decoding the segment indices as signed numbers, so
some ranges of indices greater than 63 do not work. As a temporary
workaround, limit the number of segments produced by MemoryPacking to
63 when bulk-memory is enabled.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Pretty straightforward given all we have so far.
Note that fannkuch3_manyopts has an example of
a sequence of ranges of which some must be skipped
while others must not, showing we handle that by
skipping the bad ones and updating the remaining. That
is, if that we have a sequence of two (begin, end) spans
[(10, 20),
(30, 40)]
It's possible (10, 20) maps in the new binary to (110, 120)
while (30, 40) was eliminated by the optimizer and we have
nothing valid to map it to. In that case we emit
[(110, 120)]
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Just some trivial fixes:
* Properly reset prologue after each line (unlike others, this
flag should be reset immediately).
* Test for a function's end address first, as LLVM output appears to
use 1-past-the-end-of-the-function as a location in that function,
and not the next (note the first byte of the next function, which is
ambiguously identical to that value, is used at least in low_pc;
I'm not sure if it's used in debug lines too).
* Ignore the same address if LLVM emitted it more than once, which
it does sometimes.
|
| |
|
|
|
|
|
| |
We need to track end_sequence directly, and use either
end_sequence or copy (copy emits a line without marking
it as ending a sequence).
After this, fib2 debug line output looks perfect.
|
| |
|
|
| |
While line and address values of 0 should be skipped, it
seems like column 0 are valid lines emitted by LLVM.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
DWARF from LLVM can refer to the first byte belonging to the function,
where the size LEB is, or to the first byte after that, where the local
declarations are, or the end opcode, or to one byte past that which is
one byte past the bytes that belong to the function. We aren't sure why
LLVM does this, but track it all for now.
After this all debug line positions are identified. However,
in some cases a debug line refers to one past the end of the
function, which may be an LLVM bug. That location is ambiguous
as it could also be the first byte of the next function (what
made this discovery possible was when this happened to the
last function, after which there is another section).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Control flow structures have those in addition to the normal span of
(start, end), and we need to track them too.
Tracking them during reading requires us to track control flow
structures while parsing, so that we can know to which structure
an end/else/catch refers to.
We track these locations using a map on the side of instruction
to its "extra" locations. That avoids increasing the size of the
tracking info for the much more common non-control flow
instructions.
Note that there is one more 'end' location, that of the function
(not referring to any instruction). I left that to a later PR to
not increase this one too much.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Fixes the testcase in #2343 (comment)
Looks like that's from Rust. Not sure why it would have an invalid
abbreviation code, but perhaps the LLVM there emits dwarf differently
than we've tested on so far. May be worth investigating further, but
for now emit a warning, skip that element, and don't crash.
Also fix valgrind warnings about Span values not being initialized,
which was invalid and bad as well (wasted memory in our maps,
and might have overlapped with real values), and interfered with
figuring this out.
|
| |
|
|
|
|
|
|
|
|
| |
Binaryen.js now uses offset instead of byteOffset when inspecting
a memory segment, matching the arguments on memory segment
creation. Also adds inspection of the passive property.
Previously, one would specify { offset, data, passive } on creation
and get back { byteOffset, data } upon inspection. This PR unifies
both to the keys on creation while also adding the respective C-API
to retrieve passive status, which was missing.
|
| |
|
|
|
| |
Instead of hackishly advancing the read position in the
binary buffer, call readExpression which will do that, and
also do all the debug info handling for us.
|
| |
|
|
|
|
| |
LLVM points to the start of the function in some debug line
entries - right after the size LEB of the function, which is
where the locals are declared, and before any instructions.
|
| |
|
|
|
|
|
| |
Instead of reinventing the wheel on our side, this adds ExpressionAnalyzer
bindings to the C- and JS-APIs, which can be useful for generators. For
example, a generator may decide to simplify a compilation step if a
subexpression doesn't have any side effects, or simply skip emitting
something that is likely to compile to a drop or an empty block right away.
|
| |
|
|
| |
This will make it easier to switch to something else for
offsets in wasm binaries if we get >4GB files.
|
| |
|
|
|
|
|
| |
Update high_pc values. These are interesting as they
may be a relative offset compared to the low_pc.
For functions we already had both a start and an end. Add
such tracking for instructions as well.
|
| |
|
|
|
|
|
|
| |
This adds EH instruction support for `CFGWalker`. This also implements
`call` instruction handling within a try-catch; every call can possibly
throw and unwind to the innermost catch block.
This adds tests for RedundantSetElimination pass, which uses
`CFGWalker`.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Track the beginning and end of each function, both when reading
and writing.
We track expressions and functions separately, instead of having a single
big map of (oldAddr) => (newAddr) because of the potentially ambiguous case
of the final expression in a function: it's end might be identical in offset
to the end of the function. So we have two different things that map to the
same offset. However, if the context is "the end of the function" then the
updated address is the new end of the function, even if the function ends
with a different instruction now, as the old last instruction might have
moved or been optimized out. Concretely, we have getNewExprAddr
and getNewFuncAddr, so we can ask to update the location of either
an expression or a function, and use that contextual information.
This checks for the DIE tag in order to know what we are looking for.
To be safe, if we hit an unknown tag, we halt, so that we don't silently
miss things.
As the test updates show, the new things we can do thanks to this
PR are to update compile unit and subprogram low_pc locations.
Note btw that in the first test (dwarfdump_roundtrip_dwarfdump.bin.txt)
we change 5 to 0: that is correct since that test does not write out
DWARF (it intentionally has no -g), so we do not track binary
locations while writing, and so we have nothing to update to (the
other tests show actual updating).
Also fix the order in the python test runner code to show a diff
of expected to encountered, and not the reverse, which confused
me.
|
| |
|
|
|
|
|
|
|
| |
When memory is packed and there are passive segments, bulk memory
operations that reference those segments by index need to be updated to
reflect the new indices and possibly split into multiple instructions
that reference multiple split segments. For some bulk-memory operations,
it is necessary to introduce new globals to explicitly track the drop
state of the original segments, but this PR is careful to only add
globals where necessary.
|
| |
|
|
|
|
|
| |
Mostly straightforward: go over the dwarf entries, find the
low_pc ones, and update their positions. A slight oddity is
that we must traverse both the dwarf context - which has
the rich APIs for analsis - and the YAML data structure -
which is minimal but is used for writing out.
|
| |
|
|
|
|
|
|
|
|
|
| |
Check if an entry starts a new range of addresses. Each range is a set of
related addresses, where in particular, if the first has been zeroed out
by the linker, we must omit the entire range. If we do not, then the
initial range is 0 and the others are offsets relative to it, which will
look like random addresses, perhaps into the middle of instructions, and
perhaps that happen to collide with real ones (a debugger would ignore
those, so we must too; it's easier and better to simply omit them).
See https://bugs.llvm.org/show_bug.cgi?id=44516#c2
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The new version string looks like this:
wasm-opt version 90 (version_90-18-g77329439d)
The version reported here is the version from the CMakeLists.txt file
followed by the git version in brackets. We verify that the main
version here matches the CHANGELOG to prevent people from changing
one without changeing the other.
This will help with emscripten that wants to be able to programaticaly
check the --version of binaryen tools.
See https://github.com/emscripten-core/emscripten/issues/10175
|
| |
|
|
|
|
|
|
|
|
|
|
| |
isBinary was used where we should only accept
a signed binary, as removing the | 0 from an unsigned
value may be incorrect.
This does regress a few small things (as can be seen
in the diff). If it's important we can add more sophisticated
optimizations here, perhaps like an assumption that the
signedness of a local never matters.
Fixes emscripten-core/emscripten#10173
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Multiple tables appear to be emitted when linking files
together. This fixes our support for that, which did not
update their size properly. This required patching the
YAML emitting code from LLVM in order to measure
the size and then emit it, as that code is apparently
not designed to handle changes in line table
contents.
Other minor fixes:
* Set the flags for our dwarfdump command to emit
the same as llvm-dwarfdump does with -v -all.
* Add support for a few more opcodes,
set_discriminator, set_basic_block, fixed_advance_pc,
set_isa.
* Handle a compile unit without abbreviations in the
YAML code (again, apparently not something this
LLVM code was intended to do).
* Handle a compile unit with zero entries in the
YAML code (ditto).
* Properly set the AddressSize - we use the
DWARFContext in a different way than LLVM expects,
apparently.
With this the emscripten test suite passes with
-gforce_dwarf without crashing.
My overall impression so from the the YAML code is
that it probably isn't a long-term solution for us. Perhaps
it may end up being scaffolding, that is, we can
replace it with our own code eventually that is based
on it, and remove most of the LLVM code. Before
deciding that we should get everything working first,
and this seems like the quickest path there.
|
| |
|
|
|
|
|
|
|
|
| |
* Remove implicit conversion operators from Type
Now types must be explicitly converted to uint32_t with Type::getID or
to ValueType with Type::getVT. This fixes #2572 for switches that use
Type::getVT.
* getVT => getSingle
|
| |
|
|
|
|
|
| |
Only use git to set version number if .git directory is present.
This means that for release archives the VERSION string will be used
as-is.
Fixes #2563
|
| |
|
|
|
| |
(#2542)" (#2576)
This reverts commit f62e171c38bea14302f9b79f7941a248ea704425.
|
| | |
|
| | |
|
| |
|
|
|
|
| |
By doing so we ensure that our calls to convert wasm
types to JS types never try to convert an unreachable.
Fixes #2558
|
| |
|
|
|
| |
This makes push and pop instructions not printed in the stack IR format
to make it valid wat form. Push and pop are still generated in the stack
IR in memory but not printed in the text format.
|
| |
|
|
|
| |
This allows subtype for arguments of `throw`. This also renames
`shouldBeSubTypeOrUnreachable` to `shouldBeSubTypeOrFirstIsUnreachable`,
to be consistent with `shouldBeEqualOrFirstIsUnreachable`.
|
| |
|
|
|
|
| |
This adds line and column info to wast parser exception messages to be
more readable when they are encoutered. In other cases this makes
existing line and column number more fine grained, or adds some helpful
strings (if line and column info is not available).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The analysis currently uses a dense matrix. If there are >65535
locals then the indexes don't fit in a 32-bit type like a wasm32
index, which led to overflows and incorrect behavior. To avoid
that, don't run passes with liveness analysis for now if they have
that many locals.
Note that skipping coalesce-locals (the main liveness-using
pass) is not that bad, as we run it more than once, and it's
likely that even if the first must be skipped, we can still run
the second (which is after simplify- and reorder-locals, which
can greatly reduce the local count).
Fixes #2559
|
| |
|
|
|
|
| |
- Allow `atomic.notify` and `atomic.wait` instructions to parse memory
arguments (`align` and `offset`) and print the offset in these
instruction when writing binary, rather than assuming it to be 0
- Change arguments of `parseMemAttributes` to be references
|
| |
|
|
|
|
|
|
|
|
|
| |
We have not been generating push and pop instructions in the stack IR.
Even though they are not written in binary, they have to be in the stack
IR to match the number of inputs and outputs of instructions.
Currently `BinaryenIRWriter` is used both for stack IR generation and
binary generation, so we should emit those instructions in
`BinaryenIRWriter`. `BinaryenIRToBinaryWriter`, which inherits
`BinaryenIRWriter`, does not do anything for push and pop instructions,
so they are still not emitted in binary.
|
| |
|
|
|
| |
This uses `FeatureSet` in place of `FeatureSet::Feature` when possible,
making it possible for functions take a set of multiple features as one
argument.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This adds support for the reference type proposal. This includes support
for all reference types (`anyref`, `funcref`(=`anyfunc`), and `nullref`)
and four new instructions: `ref.null`, `ref.is_null`, `ref.func`, and
new typed `select`. This also adds subtype relationship support between
reference types.
This does not include table instructions yet. This also does not include
wasm2js support.
Fixes #2444 and fixes #2447.
|
| |
|
|
|
|
|
|
|
|
|
| |
Several type-related functions currently exist outside of `Type`
class and thus in the `wasm`, effectively global, namespace. This moves
these functions into `Type` class, making them either member functions
or static functions.
Also this renames `getSize` to `getByteSize` to make it not to be
confused with `size`, which returns the number of types in multiple
types. This also reorders the order of functions in `wasm-type.cpp` to
match that of `wasm-type.h`.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Switch label names for br_table instructions were corrupted in the
binaryen.js API layer, with each label cropped down to the number of
characters that it is an index into the list.
This was due to passing UTF8ToString as a callback method to
Array.prototype.map, which passes the index as second parameter. The
second parameter of UTF8ToString is the max number of bytes to copy,
so the initial label came out as '', then 'l', then 'la', 'lab', etc.
Corrected an existing test case that had the wrong output in it.
|
| |
|
|
| |
This does something similar to #2489 for more functions, removing
boilerplate code for each module element using template functions.
|
| |
|
|
| |
Because `memory.size` returns the size in number of pages, we have to
multiply the size with the page size when converting `memory.init`.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
With this, we can update DWARF debug line info properly as
we write a new binary.
To do that we track binary locations as we write. Each
instruction is mapped to the location it is written to. We
must also adjust them as we move code around because
of LEB optimization (we emit a function or a section
with a 5-byte LEB placeholder, the maximal size; later
we shrink it which is almost always possible).
writeDWARFSections() now takes a second param, the new
locations of instructions. It then maps debug line info from the
original offsets in the binary to the new offsets in the binary
being written.
The core logic for updating the debug line section is in
wasm-debug.cpp. It basically tracks state machine logic
both to read the existing debug lines and to emit the new
ones. I couldn't find a way to reuse LLVM code for this, but
reading LLVM's code was very useful here.
A final tricky thing we need to do is to update the DWARF
section's internal size annotation. The LLVM YAML writing
code doesn't do that for us. Luckily it's pretty easy, in
fixEmittedSection we just update the first 4 bytes in place
to have the section size, after we've emitted it and know
the size.
This ignores debug lines with a 0 in the line, col, or addr,
see WebAssembly/debugging#9 (comment)
This ignores debug line offsets into the middle of
instructions, which LLVM sometimes emits for some
reason, see WebAssembly/debugging#9 (comment)
Handling that would likely at least double our memory
usage, which is unfortunate - we are run in an LTO manner,
where the entire app's DWARF is present, and it may be
massive. I think we should see if such odd offsets are
a bug in LLVM, and if we can fix or prevent that.
This does not emit "special" opcodes for debug lines. Those
are purely an optimization, which I wanted to leave for
later. (Even without them we decrease the size quite a lot,
btw, as many lines have 0s in them...)
This adds some testing that shows we can load and save
fib2.c and fannkuch.cpp properly. The latter includes more
than one function and has nontrivial code.
To actually emit correct offsets a few minor fixes are
done here:
* Fix the code section location tracking during reading -
the correct offset we care about is the body of the code
section, not including the section declaration and size.
* Fix wasm-stack debug line emitting. We need to update
in BinaryInstWriter::visit(), that is, right before writing
bytes for the instruction. That differs from
* BinaryenIRWriter::visit which is a recursive function
that also calls the children - so the offset there would be
of the first child. For some reason that is correct with
source maps, I don't understand why, but it's wrong for
DWARF...
* Print code section offsets in hex, to match other tools.
Remove DWARFUpdate pass, which was useful for testing
temporarily, but doesn't make sense now (it just updates without
writing a binary).
cc @yurydelendik
|
| |
|
|
|
|
|
|
| |
(#2544)
Without this, the first wasm-opt invocation will remove it. But it
can be very large, and we will soon start to automatically do
updating on it when it exists, so avoid the work if we aren't
actually building a final output with dwarf.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Reland "Fix renaming in FixInvokeFunctionNamesWalker (#2513)"
In the previous iteration of this change we were not calling
`renameFunctions` for each of the functions we removed.
The problem manifested itself when we rename the imported function to
`emscripten_longjmp_jmpbuf` to `emscripten_longjmp`. In this case the
import of `emscripten_longjmp` already exists so we remove the import of
`emscripten_longjmp_jmpbuf` but we were not correclty calling
renameFunctions to handle the rename of all the uses.
Add an additional test case to cover the failures that we saw on the
emscripten tree.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Optionally track the binary format code section offsets,
that is, when loading a binary, remember where each IR
node was read from. This is necessary for DWARF
debug info, as these are the offsets DWARF refers to.
(Note that eventually we may want to do something
else, like first read the DWARF and only then add
debug info annotations into the IR in a more LLVM-like
manner, but this is more straightforward and should be
enough to update debug lines and ranges).
This tracking adds noticeable overhead - every single
IR node adds an entry in a map - so avoid it unless
actually necessary. Specifically, if the user passes in
-g and there are actually DWARF sections in the
binary, and we are not about to remove those sections,
then we need it.
Print binary format code section offsets in text, when
printing with -g. This will help debug and test dwarf
support. It looks like
;; code offset: 0x7
as an annotation right before each node.
Also add support for -g in wasm-opt tests (unlike
a pass, it has just one - as a prefix).
Helps #2400
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This PR enables compiling Binaryen to WebAssembly when building binaryen.js. Since WebAssembly is best compiled and instantiated asynchronously in browsers, it also adds a new mechanism to tell if respectively when the module is ready by means of one of the following:
// Using a promise
const binaryen = require("binaryen");
binaryen.ready.then(() => {
... use normally ...
});
// Using await
const binaryen = require("binaryen");
(async () => {
await binaryen.ready;
... use normally ...
})();
// Where top-level await is available
const binaryen = await require("binaryen").ready;
... use normally ...
One can also tell if Binaryen is already ready (for example when assuming it in follow-up code) by:
if (/* we already know that */ binaryen.isReady) {
... use normally ...
} else {
throw Error("Binaryen is supposed to be ready here but isn't");
}
The JS test cases have been updated accordingly by wrapping everything in a test function and invoking it once ready. Documentation will have to be updated as well to cover this of course. New file size is about 2.5mb, even though the Wasm becomes inlined into the JS file which makes distribution across different environments a lot easier.
Also makes building binaryen (to either js or wasm) emit binaryen.js, and not binaryen_js.js etc.
Supersedes and thus fixes #1381
With .ready it also fixes #2452
|
