31 files changed, 250 insertions, 139 deletions

diff --git a/ChangeLog b/ChangeLog
index 9b9a7176b05..2cd3f8eef85 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,14 @@
+2011-10-25  Nali Toja  <nalitoja@gmail.com>  (tiny change)
+
+	* configure.in (HAVE_GNU_MAKE): Respect MAKE env-var.  (Bug#9868)
+
+2011-10-24  Paul Eggert  <eggert@cs.ucla.edu>
+
+	* configure.in (LIB_PTHREAD): Prepend -lpthread to LIBS (Bug#9852)
+	if the library is found.  Otherwise, later configure-time tests,
+	such as the test for pthread_sigmask, generate the wrong results
+	on some platforms.  Problem reported for FreeBSD by Nali Toja.
+
 2011-10-20  Paul Eggert  <eggert@cs.ucla.edu>
 
 	Time zone name fixes for non-ASCII locales (Bug#641, Bug#9794)
diff --git a/autogen/configure b/autogen/configure
index fc906db6fea..fceca6c0bec 100755
--- a/autogen/configure
+++ b/autogen/configure
@@ -10380,7 +10380,8 @@ fi
 if test "$HAVE_PTHREAD" = yes; then
   case "${canonical}" in
     *-hpux*) ;;
-    *) LIB_PTHREAD="-lpthread" ;;
+    *) LIB_PTHREAD="-lpthread"
+       LIBS="$LIB_PTHREAD $LIBS" ;;
   esac
 
 $as_echo "#define HAVE_PTHREAD 1" >>confdefs.h
diff --git a/configure.in b/configure.in
index 5b32e10853f..ee52bc9e976 100644
--- a/configure.in
+++ b/configure.in
@@ -1374,7 +1374,7 @@ dnl check for GNU Make if we have GCC and autodepend is on.
 if test "$GCC" = yes && test "$ac_enable_autodepend" = yes; then
    AC_MSG_CHECKING([whether we are using GNU Make])
    HAVE_GNU_MAKE=no
-   testval=`make --version 2>/dev/null | grep 'GNU Make'`
+   testval=`${MAKE-make} --version 2>/dev/null | grep 'GNU Make'`
    if test "x$testval" != x; then
       HAVE_GNU_MAKE=yes
    else
@@ -1723,7 +1723,8 @@ fi
 if test "$HAVE_PTHREAD" = yes; then
   case "${canonical}" in
     *-hpux*) ;;
-    *) LIB_PTHREAD="-lpthread" ;;
+    *) LIB_PTHREAD="-lpthread"
+       LIBS="$LIB_PTHREAD $LIBS" ;;
   esac
   AC_DEFINE(HAVE_PTHREAD, 1, [Define to 1 if you have pthread (-lpthread).])
 fi
@@ -3739,14 +3740,14 @@ echo
 
 if test "$HAVE_NS" = "yes"; then
    echo
-   echo "You must run \"make install\" in order to test the built application.
+   echo "You must run \"${MAKE-make} install\" in order to test the built application.
 The installed application will go to nextstep/Emacs.app and can be
 run or moved from there."
    if test "$EN_NS_SELF_CONTAINED" = "yes"; then
       echo "The application will be fully self-contained."
     else
       echo "The lisp resources for the application will be installed under ${prefix}.
-You may need to run \"make install\" with sudo.  The application will fail
+You may need to run \"${MAKE-make} install\" with sudo.  The application will fail
 to run if these resources are not installed."
    fi
    echo
diff --git a/doc/emacs/ChangeLog b/doc/emacs/ChangeLog
index 28c61e23b8c..4b51486069c 100644
--- a/doc/emacs/ChangeLog
+++ b/doc/emacs/ChangeLog
@@ -1,3 +1,14 @@
+2011-10-25  Glenn Morris  <rgm@gnu.org>
+
+	* abbrevs.texi (Saving Abbrevs):
+	quietly-read-abbrev-file is not a command.  (Bug#9866)
+
+2011-10-24  Chong Yidong  <cyd@gnu.org>
+
+	* display.texi (Scrolling): Document scroll-up-line and
+	scroll-down-line.  Document scroll-command property.
+	(Recentering): New node, split off from Scrolling.
+
 2011-10-23  Chong Yidong  <cyd@gnu.org>
 
 	* frames.texi (Scroll Bars): GTK uses right scroll bars now.
diff --git a/doc/emacs/abbrevs.texi b/doc/emacs/abbrevs.texi
index d0833ea0854..2eafadf4841 100644
--- a/doc/emacs/abbrevs.texi
+++ b/doc/emacs/abbrevs.texi
@@ -286,8 +286,6 @@ sessions.
 Write a file @var{file} describing all defined abbrevs.
 @item M-x read-abbrev-file @key{RET} @var{file} @key{RET}
 Read the file @var{file} and define abbrevs as specified therein.
-@item M-x quietly-read-abbrev-file @key{RET} @var{file} @key{RET}
-Similar but do not display a message about what is going on.
 @item M-x define-abbrevs
 Define abbrevs from definitions in current buffer.
 @item M-x insert-abbrevs
diff --git a/doc/emacs/display.texi b/doc/emacs/display.texi
index b72e24bf243..8995b1242b1 100644
--- a/doc/emacs/display.texi
+++ b/doc/emacs/display.texi
@@ -13,6 +13,7 @@ the text is displayed.
 
 @menu
 * Scrolling::              Commands to move text up and down in a window.
+* Recentering::            A scroll command that centers the current line.
 * Auto Scrolling::         Redisplay scrolls text automatically when needed.
 * Horizontal Scrolling::   Moving text left and right in a window.
 * Narrowing::              Restricting display and editing to a portion
@@ -48,15 +49,15 @@ portion of the buffer is displayed.
   Scrolling ``forward'' or ``up'' advances the portion of the buffer
 displayed in the window; equivalently, it moves the buffer text
 upwards relative to the window.  Scrolling ``backward'' or ``down''
-moves the displayed portion backwards, and moves the text downwards
-relative to the window.  In Emacs, scrolling ``up'' or ``down'' refers
-to the direction that the text moves in the window, @emph{not} the
-direction that the window moves relative to the text; this terminology
-was taken up by Emacs before the modern meaning of ``scrolling up''
-and ``scrolling down'' became widely adopted.  Hence the strange
-result that @key{PageDown} scrolls ``up'' in the Emacs sense.  In this
-manual, we refer to scrolling ``forward'' and ``backward'' where
-possible, in order to minimize confusion.
+displays an earlier portion of the buffer, and moves the text
+downwards relative to the window.
+
+  In Emacs, scrolling ``up'' or ``down'' refers to the direction that
+the text moves in the window, @emph{not} the direction that the window
+moves relative to the text.  This terminology was adopted by Emacs
+before the modern meaning of ``scrolling up'' and ``scrolling down''
+became widespread.  Hence, the strange result that @key{PageDown}
+scrolls ``up'' in the Emacs sense.
 
   The portion of a buffer displayed in a window always contains point.
 If you move point past the bottom or top of the window, scrolling
@@ -64,11 +65,6 @@ occurs automatically to bring it back onscreen (@pxref{Auto
 Scrolling}).  You can also scroll explicitly with these commands:
 
 @table @kbd
-@item C-l
-Scroll the selected window so that the current line is the center-most
-text line; on subsequent consecutive invocations, make the current
-line the top-most line, the bottom-most line, and so on in cyclic
-order; also, maybe redisplay the screen (@code{recenter-top-bottom}).
 @item C-v
 @itemx @key{next}
 @itemx @key{PageDown}
@@ -77,6 +73,86 @@ Scroll forward by nearly a full window (@code{scroll-up-command}).
 @itemx @key{prior}
 @itemx @key{PageUp}
 Scroll backward (@code{scroll-down-command}).
+@end table
+
+@kindex C-v
+@kindex M-v
+@kindex next
+@kindex prior
+@kindex PageDown
+@kindex PageUp
+@findex scroll-up-command
+@findex scroll-down-command
+  @kbd{C-v} (@code{scroll-up-command}) scrolls forward by nearly the
+whole window height.  The effect is to take the two lines at the
+bottom of the window and put them at the top, followed by lines that
+were not previously visible.  If point was in the text that scrolled
+off the top, it ends up on the window's new topmost line.  The
+@key{next} (or @key{PageDown}) key is equivalent to @kbd{C-v}.
+
+  @kbd{M-v} (@code{scroll-down-command}) scrolls backward in a similar
+way.  The @key{prior} (or @key{PageUp}) key is equivalent to
+@kbd{M-v}.
+
+@vindex next-screen-context-lines
+  The number of lines of overlap left by these scroll commands is
+controlled by the variable @code{next-screen-context-lines}, whose
+default value is 2.  You can supply the commands with a numeric prefix
+argument, @var{n}, to scroll by @var{n} lines; Emacs attempts to leave
+point unchanged, so that the text and point move up or down together.
+@kbd{C-v} with a negative argument is like @kbd{M-v} and vice versa.
+
+@vindex scroll-error-top-bottom
+  By default, these commands signal an error (by beeping or flashing
+the screen) if no more scrolling is possible, because the window has
+reached the beginning or end of the buffer.  If you change the
+variable @code{scroll-error-top-bottom} to @code{t}, the command moves
+point to the farthest possible position.  If point is already there,
+the command signals an error.
+
+@vindex scroll-preserve-screen-position
+@cindex @code{scroll-command} property
+  Some users like scroll commands to keep point at the same screen
+position, so that scrolling back to the same screen conveniently
+returns point to its original position.  You can enable this behavior
+via the variable @code{scroll-preserve-screen-position}.  If the value
+is @code{t}, Emacs adjusts point to keep the cursor at the same screen
+position whenever a scroll command moves it off-window, rather than
+moving it to the topmost or bottommost line.  With any other
+non-@code{nil} value, Emacs adjusts point this way even if the scroll
+command leaves point in the window.  This variable affects all the
+scroll commands documented in this section, as well as scrolling with
+the mouse wheel (@pxref{Wheeled Mice}); in general, it affects any
+command that has a non-@code{nil} @code{scroll-command} property.
+@xref{Property Lists,,, elisp, The Emacs Lisp Reference Manual}.
+
+@vindex scroll-up
+@vindex scroll-down
+@findex scroll-up-line
+@findex scroll-down-line
+  The commands @kbd{M-x scroll-up} and @kbd{M-x scroll-down} behave
+similarly to @code{scroll-up-command} and @code{scroll-down-command},
+except they do not obey @code{scroll-error-top-bottom}.  Prior to
+Emacs 24, these were the default commands for scrolling up and down.
+The commands @kbd{M-x scroll-up-line} and @kbd{M-x scroll-down-line}
+scroll the current window by one line at a time.  If you intend to use
+any of these commands, you might want to give them key bindings
+(@pxref{Init Rebinding}).
+
+@node Recentering
+@section Recentering
+
+@table @kbd
+@item C-l
+Scroll the selected window so the current line is the center-most text
+line; on subsequent consecutive invocations, make the current line the
+top line, the bottom line, and so on in cyclic order.  Possibly
+redisplay the screen too (@code{recenter-top-bottom}).
+
+@item M-x recenter
+Scroll the selected window so the current line is the center-most text
+line.  Possibly redisplay the screen too.
+
 @item C-M-l
 Scroll heuristically to bring useful information onto the screen
 (@code{reposition-window}).
@@ -107,14 +183,13 @@ non-zero value @var{n}, @kbd{C-l} always leaves at least @var{n}
 screen lines between point and the top or bottom of the window
 (@pxref{Auto Scrolling}).
 
-  You can also supply @kbd{C-l} with a prefix argument.  With a plain
-prefix argument, @kbd{C-u C-l}, Emacs simply recenters point.  With a
-positive argument @var{n}, it scrolls to place point @var{n} lines
-down from the top of the window.  An argument of zero puts point on
-the topmost line.  A negative argument @var{-n} puts point @var{n}
-lines from the bottom of the window.  When given an argument,
-@kbd{C-l} does not clear the screen or cycle through different screen
-positions.
+  You can also give @kbd{C-l} a prefix argument.  A plain prefix
+argument, @kbd{C-u C-l}, simply recenters point.  A positive argument
+@var{n} puts point @var{n} lines down from the top of the window.  An
+argument of zero puts point on the topmost line.  A negative argument
+@var{-n} puts point @var{n} lines from the bottom of the window.  When
+given an argument, @kbd{C-l} does not clear the screen or cycle
+through different screen positions.
 
 @vindex recenter-redisplay
   If the variable @code{recenter-redisplay} has a non-@code{nil}
@@ -127,62 +202,6 @@ becomes garbled for any reason (@pxref{Screen Garbled}).
   The more primitive command @kbd{M-x recenter} behaves like
 @code{recenter-top-bottom}, but does not cycle among screen positions.
 
-@kindex C-v
-@kindex M-v
-@kindex next
-@kindex prior
-@kindex PageDown
-@kindex PageUp
-@findex scroll-up-command
-@findex scroll-down-command
-  @kbd{C-v} (@code{scroll-up-command}) scrolls forward by nearly the
-whole window height.  The effect is to take the two lines at the
-bottom of the window and put them at the top, followed by lines that
-were not previously visible.  If point was in the text that scrolled
-off the top, it ends up on the window's new topmost line.
-
-  Similarly, @kbd{M-v} (@code{scroll-down-command}) scrolls backward.
-
-  We refer to @kbd{C-v} and @kbd{M-v} as @dfn{full-screen scroll
-commands}.  The function key @key{next}, or @key{PageDown}, is
-equivalent to @kbd{C-v}; the function key @key{prior}, or
-@key{PageUp}, is equivalent to @kbd{M-v}.
-
-@vindex next-screen-context-lines
-  The variable @code{next-screen-context-lines} controls the number of
-lines of overlap left by the full-screen scroll commands; by default,
-it is 2.  You can supply these commands with a numeric prefix argument
-@var{n}.  This scrolls the window by @var{n} lines, while attempting
-to leave point unchanged (so that the text and point move up or down
-together).  @kbd{C-v} with a negative argument is like @kbd{M-v} and
-vice versa.
-
-@vindex scroll-error-top-bottom
-  By default, the full-screen scroll commands signal an error (by
-beeping or flashing the screen) if no more scrolling is possible,
-because the window has reached the beginning or end of the buffer.  If
-you change the variable @code{scroll-error-top-bottom} to @code{t},
-Emacs instead moves point to the farthest possible position.  If point
-is already there, the command signals an error.
-
-@vindex scroll-preserve-screen-position
-  Some users like scroll commands to keep point at the same screen
-position.  Then, scrolling back to the same screen also conveniently
-returns point to its original position.  You can enable this via the
-variable @code{scroll-preserve-screen-position}.  If the value is
-@code{t}, Emacs adjusts point to keep it at the same vertical position
-within the window, rather than the window edge, whenever a scroll
-command moves it off the window.  With any other non-@code{nil} value,
-Emacs adjusts point this way even if the scroll command leaves point
-in the window.
-
-@vindex scroll-up
-@vindex scroll-down
-  The commands @code{scroll-up} and @code{scroll-down} behave
-similarly to @code{scroll-up-command} and @code{scroll-down-command},
-except they do not obey @code{scroll-error-top-bottom}.  Prior to
-Emacs 24, these were the default commands for scrolling up and down.
-
 @kindex C-M-l
 @findex reposition-window
   @kbd{C-M-l} (@code{reposition-window}) scrolls the current window
diff --git a/doc/emacs/emacs.texi b/doc/emacs/emacs.texi
index cad0e4db3c0..b25c09aa29d 100644
--- a/doc/emacs/emacs.texi
+++ b/doc/emacs/emacs.texi
@@ -342,6 +342,7 @@ Registers
 Controlling the Display
 
 * Scrolling::              Commands to move text up and down in a window.
+* Recentering::            A scrolling command that centers the current line.
 * Auto Scrolling::         Redisplay scrolls text automatically when needed.
 * Horizontal Scrolling::   Moving text left and right in a window.
 * Narrowing::              Restricting display and editing to a portion
diff --git a/doc/emacs/kmacro.texi b/doc/emacs/kmacro.texi
index ac81377aec9..4676983fc67 100644
--- a/doc/emacs/kmacro.texi
+++ b/doc/emacs/kmacro.texi
@@ -147,7 +147,7 @@ beginning of the line and then executing the macro.
 @findex kmacro-start-macro
 @findex kmacro-end-macro
   In addition to the @key{F3} and @key{F4} commands described above,
-Emacs also supports an older set of keybindings for defining and
+Emacs also supports an older set of key bindings for defining and
 executing keyboard macros.  To begin a macro definition, type @kbd{C-x
 (} (@code{kmacro-start-macro}); as with @key{F3}, a prefix argument
 appends this definition to the last keyboard macro.  To end a macro
diff --git a/doc/emacs/macos.texi b/doc/emacs/macos.texi
index f4a5a2858cf..5a97fa8460b 100644
--- a/doc/emacs/macos.texi
+++ b/doc/emacs/macos.texi
@@ -36,7 +36,7 @@ Support}), but we hope to improve it in the future.
 
   By default, the @key{alt} and @key{option} keys are the same as
 @key{Meta}.  The Mac @key{Cmd} key is the same as @key{Super}, and
-Emacs provides a set of keybindings using this modifier key that mimic
+Emacs provides a set of key bindings using this modifier key that mimic
 other Mac / GNUstep applications (@pxref{Mac / GNUstep Events}).  You
 can change these bindings in the usual way (@pxref{Key Bindings}).
 
diff --git a/doc/emacs/programs.texi b/doc/emacs/programs.texi
index 5745dd7c66c..2357902341e 100644
--- a/doc/emacs/programs.texi
+++ b/doc/emacs/programs.texi
@@ -1441,7 +1441,7 @@ parsed, and move point there (@code{semantic-complete-jump}).
 @kindex C-c , @key{SPC}
 Display a list of possible completions for the symbol at point
 (@code{semantic-complete-analyze-inline}).  This also activates a set
-of special keybindings for choosing a completion: @key{RET} accepts
+of special key bindings for choosing a completion: @key{RET} accepts
 the current completion, @kbd{M-n} and @kbd{M-p} cycle through possible
 completions, @key{TAB} completes as far as possible and then cycles,
 and @kbd{C-g} or any other key aborts completion.
diff --git a/doc/emacs/rmail.texi b/doc/emacs/rmail.texi
index 9e30b657284..71c23655608 100644
--- a/doc/emacs/rmail.texi
+++ b/doc/emacs/rmail.texi
@@ -1242,11 +1242,12 @@ coding system, the result should be readable.
 @node Rmail Editing
 @section Editing Within a Message
 
-  Most of the usual Emacs keybindings are available in Rmail mode, though a
-few, such as @kbd{C-M-n} and @kbd{C-M-h}, are redefined by Rmail for
-other purposes.  However, the Rmail buffer is normally read only, and
-most of the letters are redefined as Rmail commands.  If you want to
-edit the text of a message, you must use the Rmail command @kbd{e}.
+  Most of the usual Emacs key bindings are available in Rmail mode,
+though a few, such as @kbd{C-M-n} and @kbd{C-M-h}, are redefined by
+Rmail for other purposes.  However, the Rmail buffer is normally read
+only, and most of the letters are redefined as Rmail commands.  If you
+want to edit the text of a message, you must use the Rmail command
+@kbd{e}.
 
 @table @kbd
 @item e
diff --git a/doc/emacs/search.texi b/doc/emacs/search.texi
index 31b5aa37f83..a8bd1cdf18d 100644
--- a/doc/emacs/search.texi
+++ b/doc/emacs/search.texi
@@ -268,8 +268,8 @@ use it (@pxref{Rebinding}).
 
 @vindex isearch-mode-map
   When incremental search is active, you can type @kbd{C-h C-h} to
-access interactive help options, including a list of special
-keybindings.  These keybindings are part of the keymap
+access interactive help options, including a list of special key
+bindings.  These key bindings are part of the keymap
 @code{isearch-mode-map} (@pxref{Keymaps}).
 
 @node Isearch Yank
diff --git a/etc/NEWS b/etc/NEWS
index 24aea694902..d6b0bdb484c 100644
--- a/etc/NEWS
+++ b/etc/NEWS
@@ -293,7 +293,7 @@ of buffer at first key-press (instead move to top/bottom of buffer)
 when `scroll-error-top-bottom' is non-nil.
 +++
 *** New variable `scroll-error-top-bottom' (see above).
-
++++
 *** New scrolling commands `scroll-up-line' and `scroll-down-line'
 scroll a line instead of full screen.
 +++
diff --git a/lisp/ChangeLog b/lisp/ChangeLog
index 8ceb3617176..95113007f27 100644
--- a/lisp/ChangeLog
+++ b/lisp/ChangeLog
@@ -1,3 +1,38 @@
+2011-10-25  Michael Albinus  <michael.albinus@gmx.de>
+
+	* net/tramp-sh.el (tramp-sh-handle-file-directory-p): Return t for
+	filenames "/method:foo:".
+
+2011-10-25  Stefan Monnier  <monnier@iro.umontreal.ca>
+
+	* comint.el (comint-get-old-input-default): Fix use-prompt-regexp case
+	(bug#9865).
+
+2011-10-24  Glenn Morris  <rgm@gnu.org>
+
+	* emacs-lisp/easy-mmode.el (define-minor-mode): Doc fix.  (Bug#9819)
+
+2011-10-24  Michael Albinus  <michael.albinus@gmx.de>
+
+	* notifications.el: Add the requirement of a running D-Bus session
+	bus to the Commentary.
+
+2011-10-24  Juri Linkov  <juri@jurta.org>
+
+	* isearch.el (isearch-occur): Let-bind `search-spaces-regexp' to
+	`search-whitespace-regexp' only when `isearch-regexp' is non-nil.
+	(Bug#9364)
+
+2011-10-24  Juri Linkov  <juri@jurta.org>
+
+	* info.el (Info-following-node-name-re): Add newline to the list
+	of allowed characters for leading space.  (Bug#9824)
+
+2011-10-24  Stefan Monnier  <monnier@iro.umontreal.ca>
+
+	* progmodes/octave-inf.el (inferior-octave-mode-map): Fix C-c C-h binding.
+	* progmodes/octave-mod.el (octave-help): Remove.
+
 2011-10-23  Michael Albinus  <michael.albinus@gmx.de>
 
 	Sync with Tramp 2.2.3.
@@ -16,16 +51,16 @@
 	for toggle-read-only.  Note that this hasn't called vc-next-action
 	since 2008-05-02, though it wasn't documented at the time.
 
-	* vc/ediff-init.el (ediff-toggle-read-only-function): Use
-	toggle-read-only.
+	* vc/ediff-init.el (ediff-toggle-read-only-function):
+	Use toggle-read-only.
 
 2011-10-22  Alan Mackenzie  <bug-cc-mode@gnu.org>
 
 	Fix bug #9560, sporadic wrong indentation; improve instrumentation
 	of c-parse-state.
 
-	* cc-engine.el (c-append-lower-brace-pair-to-state-cache): correct
-	faulty logical expression.
+	* cc-engine.el (c-append-lower-brace-pair-to-state-cache):
+	correct faulty logical expression.
 	(c-parse-state-state, c-record-parse-state-state):
 	(c-replay-parse-state-state): New defvar/defuns.
 	(c-debug-parse-state): Use new functions.
@@ -39,8 +74,8 @@
 
 	* progmodes/idlwave.el (idlwave-mode):
 	* progmodes/vera-mode.el (vera-mode): No need to set
-	require-final-newline; that's done in prog-mode.  Suggested by
-	Stefan Monnier.
+	require-final-newline; that's done in prog-mode.
+	Suggested by Stefan Monnier.
 
 2011-10-21  Martin Rudalics  <rudalics@gmx.at>
 
@@ -61,8 +96,8 @@
 2011-10-21  Chong Yidong  <cyd@gnu.org>
 
 	* progmodes/idlwave.el (idlwave-mode):
-	* progmodes/vera-mode.el (vera-mode): Use
-	mode-require-final-newline.
+	* progmodes/vera-mode.el (vera-mode):
+	Use mode-require-final-newline.
 
 2011-10-20  Glenn Morris  <rgm@gnu.org>
 
@@ -198,8 +233,8 @@
 	(global-whitespace-mode, global-whitespace-newline-mode):
 	* xt-mouse.el (xterm-mouse-mode): Doc fix.
 
-	* emacs-lisp/easy-mmode.el (define-globalized-minor-mode): Fix
-	autogenerated docstring.
+	* emacs-lisp/easy-mmode.el (define-globalized-minor-mode):
+	Fix autogenerated docstring.
 
 2011-10-19  Juri Linkov  <juri@jurta.org>
 
diff --git a/lisp/comint.el b/lisp/comint.el
index 591be5e2d9d..b91b82adb21 100644
--- a/lisp/comint.el
+++ b/lisp/comint.el
@@ -2151,8 +2151,10 @@ current line, if point is on an output field.
 If `comint-use-prompt-regexp' is non-nil, then return
 the current line with any initial string matching the regexp
 `comint-prompt-regexp' removed."
-  (let ((bof (field-beginning)))
-    (if (null (get-char-property bof 'field)) ;Not `output'.
+  (let (bof)
+    (if (and (not comint-use-prompt-regexp)
+             ;; Make sure we're in an input rather than output field.
+             (null (get-char-property (setq bof (field-beginning)) 'field)))
 	(field-string-no-properties bof)
       (comint-bol)
       (buffer-substring-no-properties (point) (line-end-position)))))
diff --git a/lisp/emacs-lisp/easy-mmode.el b/lisp/emacs-lisp/easy-mmode.el
index b1cb0615e43..4b6f4d634ca 100644
--- a/lisp/emacs-lisp/easy-mmode.el
+++ b/lisp/emacs-lisp/easy-mmode.el
@@ -94,8 +94,9 @@ Optional LIGHTER is displayed in the modeline when the mode is on.
 Optional KEYMAP is the default keymap bound to the mode keymap.
   If non-nil, it should be a variable name (whose value is a keymap),
   or an expression that returns either a keymap or a list of
-  arguments for `easy-mmode-define-keymap'.  If KEYMAP is not a symbol,
-  this also defines the variable MODE-map.
+  arguments for `easy-mmode-define-keymap'.  If you supply a KEYMAP
+  argument that is not a symbol, this macro defines the variable
+  MODE-map and gives it the value that KEYMAP specifies.
 
 BODY contains code to execute each time the mode is enabled or disabled.
   It is executed after toggling the mode, and before running MODE-hook.
diff --git a/lisp/facemenu.el b/lisp/facemenu.el
index 54b17d58f33..4f9db02b5e1 100644
--- a/lisp/facemenu.el
+++ b/lisp/facemenu.el
@@ -645,6 +645,8 @@ a list of colors that the current display can handle."
                ;; text in menu entries) and `SystemWindowText' (the default
                ;; color w32 uses for the text in windows and dialogs) may
                ;; be the same display color and be adjacent in the list.
+               ;; These system colors all have names prefixed with "System",
+               ;; which is hardcoded in w32fns.c (SYSTEM_COLOR_PREFIX).
                ;; This makes them different to any other color.  Bug#9722
 	       (not (and (eq system-type 'windows-nt)
 			 (string-match-p "^System" (car (car l))))))
diff --git a/lisp/info.el b/lisp/info.el
index 4ccbeba2a47..b8deb3c9c7f 100644
--- a/lisp/info.el
+++ b/lisp/info.el
@@ -2015,7 +2015,7 @@ Submatch 1 is the complete node name.
 Submatch 2 if non-nil is the parenthesized file name part of the node name.
 Submatch 3 is the local part of the node name.
 End of submatch 0, 1, and 3 are the same, so you can safely concat."
-  (concat "[ \t]*"			;Skip leading space.
+  (concat "[ \t\n]*"			;Skip leading space.
 	  "\\(\\(([^)]+)\\)?"	;Node name can start with a file name.
 	  "\\([" (or allowedchars "^,\t\n") "]*" ;Any number of allowed chars.
 	  "[" (or allowedchars "^,\t\n") " ]" ;The last char can't be a space.
diff --git a/lisp/isearch.el b/lisp/isearch.el
index 6cfcce59672..6bb23916da3 100644
--- a/lisp/isearch.el
+++ b/lisp/isearch.el
@@ -1452,7 +1452,7 @@ string.  NLINES has the same meaning as in `occur'."
 	;; Set `search-upper-case' to nil to not call
 	;; `isearch-no-upper-case-p' in `occur-1'.
 	(search-upper-case nil)
-	(search-spaces-regexp search-whitespace-regexp))
+	(search-spaces-regexp (if isearch-regexp search-whitespace-regexp)))
     (occur regexp nlines)))
 
 (declare-function hi-lock-read-face-name "hi-lock" ())
diff --git a/lisp/net/tramp-sh.el b/lisp/net/tramp-sh.el
index 56424f79476..55732194bc8 100644
--- a/lisp/net/tramp-sh.el
+++ b/lisp/net/tramp-sh.el
@@ -1594,17 +1594,14 @@ and gid of the corresponding user is taken.  Both parameters must be integers."
 
 (defun tramp-sh-handle-file-directory-p (filename)
   "Like `file-directory-p' for Tramp files."
-  ;; Care must be taken that this function returns `t' for symlinks
-  ;; pointing to directories.  Surely the most obvious implementation
-  ;; would be `test -d', but that returns false for such symlinks.
-  ;; CCC: Stefan Monnier says that `test -d' follows symlinks.  And
-  ;; I now think he's right.  So we could be using `test -d', couldn't
-  ;; we?
-  ;;
-  ;; Alternatives: `cd %s', `test -d %s'
   (with-parsed-tramp-file-name filename nil
-    (with-file-property v localname "file-directory-p"
-      (tramp-run-test "-d" filename))))
+    ;; `file-directory-p' is used as predicate for filename completion.
+    ;; Sometimes, when a connection is not established yet, it is
+    ;; desirable to return t immediately for "/method:foo:".  It can
+    ;; be expected that this is always a directory.
+    (or (zerop (length localname))
+	(with-file-property v localname "file-directory-p"
+	  (tramp-run-test "-d" filename)))))
 
 (defun tramp-sh-handle-file-writable-p (filename)
   "Like `file-writable-p' for Tramp files."
diff --git a/lisp/notifications.el b/lisp/notifications.el
index 42cd40df36b..a4e7fdd5425 100644
--- a/lisp/notifications.el
+++ b/lisp/notifications.el
@@ -30,6 +30,9 @@
 ;;
 ;;   (require 'notifications)
 
+;; For proper usage, Emacs must be started in an environment with an
+;; active D-Bus session bus.
+
 ;;; Code:
 (eval-when-compile
   (require 'cl))
diff --git a/lisp/progmodes/octave-inf.el b/lisp/progmodes/octave-inf.el
index cb64b2436c6..e9d890c3f26 100644
--- a/lisp/progmodes/octave-inf.el
+++ b/lisp/progmodes/octave-inf.el
@@ -68,7 +68,7 @@ mode, set this to (\"-q\" \"--traditional\")."
     (define-key map "\C-c\C-l" 'inferior-octave-dynamic-list-input-ring)
     (define-key map [menu-bar inout list-history]
       '("List Input History" . inferior-octave-dynamic-list-input-ring))
-    (define-key map "\C-c\C-h" 'octave-help)
+    (define-key map "\C-c\C-h" 'info-lookup-symbol)
     map)
   "Keymap used in Inferior Octave mode.")
 
diff --git a/lisp/progmodes/octave-mod.el b/lisp/progmodes/octave-mod.el
index 183347cdeca..5e13b8533e7 100644
--- a/lisp/progmodes/octave-mod.el
+++ b/lisp/progmodes/octave-mod.el
@@ -655,14 +655,6 @@ including a reproducible test case and send the message."
 
   (easy-menu-add octave-mode-menu)
   (octave-initialize-completions))
-
-(defvar info-lookup-mode)
-
-(defun octave-help ()
-  "Get help on Octave symbols from the Octave info files.
-Look up symbol in the function, operator and variable indices of the info files."
-  (let ((info-lookup-mode 'octave-mode))
-    (call-interactively 'info-lookup-symbol)))
 
 ;;; Miscellaneous useful functions
 
diff --git a/lisp/subr.el b/lisp/subr.el
index 05ac198dd13..c88cef0ba0f 100644
--- a/lisp/subr.el
+++ b/lisp/subr.el
@@ -116,8 +116,6 @@ BODY should be a list of Lisp expressions.
   ;; depend on backquote.el.
   (list 'function (cons 'lambda cdr)))
 
-;; Partial application of functions (similar to "currying").
-;; This function is here rather than in subr.el because it uses CL.
 (defun apply-partially (fun &rest args)
   "Return a function that is a partial application of FUN to ARGS.
 ARGS is a list of the first N arguments to pass to FUN.
diff --git a/nt/ChangeLog b/nt/ChangeLog
index fb3a168ebfe..08fd7677077 100644
--- a/nt/ChangeLog
+++ b/nt/ChangeLog
@@ -1,3 +1,12 @@
+2011-10-25  Eli Zaretskii  <eliz@gnu.org>
+
+	* makefile.w32-in (dist): Don't put the top-level INSTALL into the
+	distribution.  (Bug#9861)
+
+2011-10-25  Christoph Scholtes  <cschol2112@googlemail.com>
+
+	* INSTALL: Update URL for GTK download page.
+
 2011-10-19  Eli Zaretskii  <eliz@gnu.org>
 
 	* config.nt (HAVE_TZNAME, HAVE_DECL_TZNAME): Define.
diff --git a/nt/INSTALL b/nt/INSTALL
index b4a97011922..613610890ae 100644
--- a/nt/INSTALL
+++ b/nt/INSTALL
@@ -323,7 +323,7 @@
   For PNG images, we recommend to use versions 1.4.x and later of
   libpng, because previous versions had security issues.  You can find
   precompiled libraries and headers on the GTK download page for
-  Windows (http://www.gtk.org/download-windows.html).
+  Windows (http://www.gtk.org/download/win32.php).
 
   Versions 1.4.0 and later of libpng are binary incompatible with
   earlier versions, so Emacs will only look for libpng libraries which
diff --git a/nt/makefile.w32-in b/nt/makefile.w32-in
index 4e4e6eccbb7..07d9be2c117 100644
--- a/nt/makefile.w32-in
+++ b/nt/makefile.w32-in
@@ -263,7 +263,6 @@ dist: install-bin
 	$(CP) "$(INSTALL_DIR)/COPYING" $(TMP_DIST_DIR)

 	$(CP) "$(INSTALL_DIR)/README" $(TMP_DIST_DIR)

 	$(CP) "$(INSTALL_DIR)/README.W32" $(TMP_DIST_DIR)

-	$(CP) "$(INSTALL_DIR)/INSTALL" $(TMP_DIST_DIR)

 	$(CP_DIR) "$(INSTALL_DIR)/bin" $(TMP_DIST_DIR)

 	$(CP_DIR) "$(INSTALL_DIR)/etc" $(TMP_DIST_DIR)

 	$(CP_DIR) "$(INSTALL_DIR)/info" $(TMP_DIST_DIR)

diff --git a/src/ChangeLog b/src/ChangeLog
index 46c22caeea9..fb0057770e6 100644
--- a/src/ChangeLog
+++ b/src/ChangeLog
@@ -1,4 +1,4 @@
-2011-10-24  Paul Eggert  <eggert@cs.ucla.edu>
+2011-10-25  Paul Eggert  <eggert@cs.ucla.edu>
 
 	Fix integer width and related bugs.
 	* alloc.c (pure_bytes_used_lisp, pure_bytes_used_non_lisp):
@@ -788,6 +788,20 @@
 	rather than rolling our own approximation.
 	(SCROLL_BAR_VEC_SIZE): Remove; not used.
 
+2011-10-25  Paul Eggert  <eggert@cs.ucla.edu>
+
+	* dispextern.h (Fcontrolling_tty_p): New decl (Bug#6649 part 2).
+
+2011-10-25  Stefan Monnier  <monnier@iro.umontreal.ca>
+
+	* keyboard.c (test_undefined): New function (bug#9751).
+	(read_key_sequence): Use it to detect when a key is bound to `undefined'.
+
+2011-10-25  Enami Tsugutomo  <tsugutomo.enami@jp.sony.com>
+
+	* sysdep.c (init_sys_modes): Fix the check for the controlling
+	terminal (Bug#6649).
+
 2011-10-20  Eli Zaretskii  <eliz@gnu.org>
 
 	* dispextern.h (struct bidi_it): New member next_en_type.
diff --git a/src/dispextern.h b/src/dispextern.h
index 5f2c844b58d..b1c3d6237c9 100644
--- a/src/dispextern.h
+++ b/src/dispextern.h
@@ -3346,6 +3346,7 @@ extern int tty_capable_p (struct tty_display_info *, unsigned, unsigned long, un
 extern void set_tty_color_mode (struct tty_display_info *, struct frame *);
 extern struct terminal *get_named_tty (const char *);
 EXFUN (Ftty_type, 1);
+EXFUN (Fcontrolling_tty_p, 1);
 extern void create_tty_output (struct frame *);
 extern struct terminal *init_tty (const char *, const char *, int);
 extern void tty_append_glyph (struct it *);
diff --git a/src/keyboard.c b/src/keyboard.c
index 3ff0e82440b..f5a3ef07829 100644
--- a/src/keyboard.c
+++ b/src/keyboard.c
@@ -8907,6 +8907,14 @@ keyremap_step (Lisp_Object *keybuf, int bufsize, volatile keyremap *fkey,
   return 0;
 }
 
+static int
+test_undefined (Lisp_Object binding)
+{
+  return (EQ (binding, Qundefined)
+	  || (!NILP (binding) && SYMBOLP (binding)
+	      && EQ (Fcommand_remapping (binding, Qnil, Qnil), Qundefined)));
+}
+
 /* Read a sequence of keys that ends with a non prefix character,
    storing it in KEYBUF, a buffer of size BUFSIZE.
    Prompt with PROMPT.
@@ -9857,7 +9865,9 @@ read_key_sequence (Lisp_Object *keybuf, int bufsize, Lisp_Object prompt,
 	    }
 	}
 
-      if (first_binding < nmaps && NILP (submaps[first_binding])
+      if (first_binding < nmaps
+	  && NILP (submaps[first_binding])
+	  && !test_undefined (defs[first_binding])
 	  && indec.start >= t)
 	/* There is a binding and it's not a prefix.
 	   (and it doesn't have any input-decode-map translation pending).
@@ -9884,7 +9894,9 @@ read_key_sequence (Lisp_Object *keybuf, int bufsize, Lisp_Object prompt,
 				  /* If there's a binding (i.e.
 				     first_binding >= nmaps) we don't want
 				     to apply this function-key-mapping.  */
-				  fkey.end + 1 == t && first_binding >= nmaps,
+				  fkey.end + 1 == t
+				  && (first_binding >= nmaps
+				      || test_undefined (defs[first_binding])),
 				  &diff, prompt);
 	    UNGCPRO;
 	    if (done)
diff --git a/src/sysdep.c b/src/sysdep.c
index d2ce5a8cc1b..efc627e80b7 100644
--- a/src/sysdep.c
+++ b/src/sysdep.c
@@ -854,6 +854,7 @@ void
 init_sys_modes (struct tty_display_info *tty_out)
 {
   struct emacs_tty tty;
+  Lisp_Object terminal;
 
   Vtty_erase_char = Qnil;
 
@@ -907,7 +908,9 @@ init_sys_modes (struct tty_display_info *tty_out)
       tty.main.c_cflag &= ~PARENB;/* Don't check parity */
     }
 #endif
-  if (tty_out->input == stdin)
+
+  XSETTERMINAL(terminal, tty_out->terminal);
+  if (!NILP (Fcontrolling_tty_p (terminal)))
     {
       tty.main.c_cc[VINTR] = quit_char;	/* C-g (usually) gives SIGINT */
       /* Set up C-g for both SIGQUIT and SIGINT.