| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously the only Ifs that were typed unreachable were those in which
both arms were unreachable and those in which the condition was
unreachable that would have otherwise been typed none. This caused
problems in IRBuilder because Ifs with unreachable conditions and
value-returning arms would have concrete types, effectively hiding the
unreachable condition from the logic for dropping concretely typed
expressions preceding an unreachable expression when finishing a scope.
Relax the conditions under which an If can be typed unreachable so that
all Ifs with unreachable conditions or two unreachable arms are typed
unreachable. Propagating unreachability more eagerly this way makes
various optimizations of Ifs more powerful. It also requires new
handling for unreachable Ifs with concretely typed arms in the Printer
to ensure that printed wat remains valid.
Also update Unsubtyping, Flatten, and CodeFolding to account for the
newly unreachable Ifs.
|
| |
|
|
|
| |
0x7800 as FP16 is 32,768 not 32,767 as I had in the comment.
I also added another comment to explain the somewhat confusing behavior.
|
| |
|
|
|
|
|
|
|
|
| |
Note: FP16 is a little different from F32/F64 since it can't represent
the full 2^16 integer range. 65504 is the max whole integer. This leads
to some slightly strange behavior when converting integers greater than
65504 since they become infinity.
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before this change, replace lane was converting all the F16 lanes to F32
and then replacing one lane with the F16 (I32 representation) value, but
it did not then convert all the other lanes back to F16 (I32). To fix
this we can just leave the lanes as I32 and replace the one lane.
Note: Previous replace lane tests didn't catch this since they started
with vectors with all zeros so the F32->I32 didn't matter. Also, other
operations don't run into this issue since they iterate over all lanes
and convert the F32's back to F16 (I32).
---------
Co-authored-by: Alon Zakai <alonzakai@gmail.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
A few notes:
- The F32x4 and F64x2 versions of madd and nmadd are missing spect
tests.
- For madd, the implementation was incorrectly doing `(b*c)+a` where it
should be `(a*b)+c`.
- For nmadd, the implementation was incorrectly doing `(-b*c)+a` where
it should be `-(a*b)+c`.
- There doesn't appear to be a great way to actually implement a fused
nmadd, but the spec allows the double rounded version I added.
|
| |
|
|
| |
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
|
| |
|
|
| |
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Spec tests pass the value `ref.extern n`, where `n` is some integer,
into exported functions that expect to receive externrefs and receive
such values back out as return values. The payload serves to distinguish
externrefs so the test can assert that the correct one was returned.
Parse these values in wast scripts and represent them as externalized
i31refs carrying the payload. We will need a different representation
eventually, since some tests explicitly expect these externrefs to not
be i31refs, but this suffices to get several new tests passing.
To get the memory64 version of table_grow.wast passing, additionally fix
the interpreter to handle growing 64-bit tables correctly.
Delete the local versions of the upstream tests that can now be run
successfully.
|
| |
|
|
|
|
|
|
| |
The leading bytes that indicate what kind of heap type is being defined
are bytes, but we were previously treating them as SLEB128-encoded
values. Since we emit the smallest LEB encodings possible, we were
writing the correct bytes in output files, but we were also improperly
accepting binaries that used more than one byte to encode these values.
This was caught by an upstream spec test.
|
| |
|
|
|
|
| |
Run the upstream tests by default, except for a large list of them that
do not successfully run. Remove the local version of those that do
successfully run where the local version is entirely subsumed by the
upstream version.
|
| |
|
|
|
|
| |
* Add interpreter support for exnref values.
* Fix optimization passes to support try_table.
* Enable the interpreter (but not in V8, see code) on exceptions.
|
| |
|
|
|
|
|
|
|
| |
IRBuilder is responsible for validation involving type annotations on GC
instructions because those type annotations may not be preserved in the
built IR to be used by the main validator. For `array.init_elem`, we
were not using the type annotation to validate the element segment,
which allowed us to parse invalid modules when the reference operand was
a nullref. Add the missing validation in IRBuilder and fix a relevant
spec test.
|
| |
|
|
|
| |
Also use TableInit in the interpreter to initialize module's table
state, which will now handle traps properly, fixing #6431
|
| |
|
|
| |
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
|
| |
|
|
| |
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
|
| |
|
|
| |
Specified at
https://github.com/WebAssembly/half-precision/blob/main/proposals/half-precision/Overview.md
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
When lacking a common supertype the GLB operation makes the type of the cast
unreachable, which errors on getHeapType in the later code.
Fixes #6738
|
| |
|
|
|
|
|
| |
Update the validator to reject mixed-shareability ref.eq, although this
is still under discussion in
https://github.com/WebAssembly/shared-everything-threads/issues/76. Fix
the implementation of `Literal::operator==` to work properly with shared
i31ref.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
(#6752)" (#6761)
Allowing Literals with different types to compare equal causes problems
for passes that want equality to mean real equality, e.g. because they
are using literals as map keys or because they otherwise need to use
them interchangeably.
At a minimum, we would need to differentiate a `refEq` operation where
mixed-shareability i31refs can compare equal from physical equality on
Literals, but there is also appetite to disallow mixed-shareability
ref.eq at the spec level. See
https://github.com/WebAssembly/shared-everything-threads/issues/76.
|
| |
|
|
|
|
|
| |
Normally, values of different types can never compare equal to each
other, but since i31refs are not actually allocations, `ref.eq` has no
way to differentiate a shared i31ref and an unshared i31ref with the
same value, so it will report them as equal. Update the implementation
of value equality to reflect this correctly.
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
Implement `ref.i31_shared` the new instruction for creating references
to shared i31s. Implement binary and text parsing and emitting as well
as interpretation. Copy the upstream spec test for i31 and modify it so
that all the heap types are shared. Comment out some parts that we do
not yet support.
|
| |
|
|
|
| |
`any.convert_extern` and `extern.convert_any` return references to
shared heap types iff their operands are references to shared heap
types.
|
| |
|
|
|
|
|
|
|
| |
Rename instructions `extern.internalize` into `any.convert_extern` and
`extern.externalize` into `extern.convert_any` to follow more closely
the spec. This was changed in
https://github.com/WebAssembly/gc/issues/432.
The legacy name is still accepted in text inputs and in the C and JS
APIs.
|
| |
|
|
| |
Such as `ref.eq`, `i31.get_{s,u}`, and `array.len`. Also validate that
struct and array operations work on shared structs and arrays.
|
| |
|
| |
Add spec tests checking validation for structs and arrays.
|
| |
|
| |
And delete tests that no longer pass now that multivalue is standard.
|
| |
|
|
|
| |
For 32-bit memories, the offset value must be in the u32 range. Update
the address.wast spec test to assert that a module with an overlarge
offset value is invalid rather than malformed.
|
| |
|
|
|
|
| |
Fix the wast parser to accept IDs on quoted modules, remove tests that are
invalidated by the multimemory proposal, and add validation that the total
number of variables in a function is less than 2^32 and that the code section is
present if there is a non-empty function section.
|
| |
|
|
|
| |
Re-triage all the disabled spec tests and re-enable many of them.
Improve the module splitting logic to correctly handle (by skipping)
quoted modules and their associated assertions.
|
| |
|
|
|
|
|
|
|
| |
Not all uses of the `reftype` parser handled the fact that it returned a
`MaybeResult`. Change its name to `maybeReftype`, add a new `reftype`
parser
that returns an error if there is no reftype, and update all the use
sites.
Fixes #6655.
|
| |
|
|
| |
This renames old EH tests in the form of `-eh-old.wast` to
`-eh-legacy.wast`, to be clearer in names.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use the new wast parser to parse a full script up front, then traverse the
parsed script data structure and execute the commands. wasm-shell had previously
used the new wat parser for top-level modules, but it now uses the new parser
for module assertions as well. Fix various bugs this uncovered.
After this change, wasm-shell supports all the assertions used in the upstream
spec tests (although not new kinds of assertions introduced in any proposals).
Uncomment various `assert_exhaustion` tests that we can now execute.
Other kinds of assertions remain commented out in our tests: wasm-shell now
supports `assert_unlinkable`, but the interpreter does not eagerly check for the
existence of imports, so those tests do not pass. Tests that check for NaNs also
remain commented out because they do not yet use the standard syntax that
wasm-shell now supports for canonical and arithmetic NaN results, and our
interpreter would not pass all of those tests even if they did use the standard
syntax.
|
| |
|
|
|
|
|
|
|
|
|
| |
The spec tests use an extension of the standard text format that includes
various commands and assertions used to test WebAssembly implementations. Add a
utility to parse this extended WebAssembly script format and use it in
wasm-shell to check that it parses our spec tests without error. Fix a few
errors the new parser found in our spec tests.
A future PR will rewrite wasm-shell to interpret the results of the new parser,
but for now to keep the diff smaller, do not do anything with the new parser
except check for errors.
|
| |
|
|
|
|
|
| |
Tests is still very limited. Hopefully we can use the upstream spec
tests soon and avoid having to write our own tests for
`.set/.set/.fill/etc`.
See https://github.com/WebAssembly/memory64/issues/51
|
| |
|
|
|
|
| |
A test in spec/comments.wast is failing, but only on the Windows builder. It
probably has something to do with line breaks. For now, just comment out the
test. With luck, it will be fixed naturally when we update wasm-shell to parse
commands using `Lexer` instead of `SExpressionParser`.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Updating just one or the other of these tools would cause the tests
spec/import-after-*.fail.wast to fail, since only the updated tool would
correctly fail to parse its contents. To avoid this, update both tools at
once. (The tests erroneously pass before this change because check.py does not
ensure that .fail.wast tests fail, only that failing tests end in .fail.wast.)
In wasm-shell, to minimize the diff, only use the new parser to parse modules
and instructions. Continue using the legacy parsing based on s-expressions for
the other wast commands. Updating the parsing of the other commands to use
`Lexer` instead of `SExpressionParser` is left as future work. The boundary
between the two parsing styles is somewhat hacky, but it is worth it to enable
incremental development.
Update the tests to fix incorrect wast rejected by the new parser. Many of the
spec/old_* tests use non-standard forms from before Wasm MVP was standardized,
so fixing them would have been onerous. All of these tests have non-old_*
variants, so simply delete them.
|
| |
|
|
|
|
|
|
|
| |
We previously ignored unknown wast commands, which could lead to the mistaken
impression that we were passing test cases that we were in fact not running at
all. Clarify matters by having wasm-shell error out on unrecognized commands,
and comment out all such commands in our versions of the spec test. As we work
toward being able to run the upstream spec tests, having these unsupported
commands explicitly commented out will make it easier to track progress toward
full support.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The latest idea for efficient string constants is to encode the constants in
the import names of their globals and implement fast paths in the engines for
materializing those constants at instantiation time without needing to parse
anything in JS. This strategy only works for valid strings (i.e. strings without
unpaired surrogates) because only valid strings can be used as import names in
the WebAssembly syntax.
Add a new configuration of the StringLowering pass that encodes valid string
contents in import names, falling back to the JSON custom section approach for
invalid strings.
To test this chang, update the printer to escape import and export names
properly and update the legacy parser to parse escapes in import and export
names properly. As a drive-by, remove the incorrect check in the parser that the
import module and base names are non-empty.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a combined commit covering multiple PRs fixing the handling of return
calls in different areas. The PRs are all landed as a single commit to ensure
internal consistency and avoid problems with bisection.
Original PR descriptions follow:
* Fix inlining of `return_call*` (#6448)
Previously we transformed return calls in inlined function bodies into normal
calls followed by branches out to the caller code. Similarly, when inlining a
`return_call` callsite, we simply added a `return` after the body inlined at the
callsite. These transformations would have been correct if the semantics of
return calls were to call and then return, but they are not correct for the
actual semantics of returning and then calling.
The previous implementation is observably incorrect for return calls inside try
blocks, where the previous implementation would run the inlined body within the
try block, but the proper semantics would be to run the inlined body outside the
try block.
Fix the problem by transforming inlined return calls to branches followed by
calls rather than as calls followed by branches. For the case of inlined return
call callsites, insert branches out of the original body of the caller and
inline the body of the callee as a sibling of the original caller body. For the
other case of return calls appearing in inlined bodies, translate the return
calls to branches out to calls inserted as siblings of the original inlined
body.
In both cases, it would have been convenient to use multivalue block return to
send call parameters along the branches to the calls, but unfortunately in our
IR that would have required tuple-typed scratch locals to unpack the tuple of
operands at the call sites. It is simpler to just use locals to propagate the
operands in the first place.
* Fix interpretation of `return_call*` (#6451)
We previously interpreted return calls as calls followed by returns, but that is
not correct both because it grows the size of the execution stack and because it
runs the called functions in the wrong context, which can be observable in the
case of exception handling.
Update the interpreter to handle return calls correctly by adding a new
`RETURN_CALL_FLOW` that behaves like a return, but carries the arguments and
reference to the return-callee rather than normal return values.
`callFunctionInternal` is updated to intercept this flow and call return-called
functions in a loop until a function returns with some other kind of flow.
Pull in the upstream spec tests return_call.wast, return_call_indirect.wast, and
return_call_ref.wast with light editing so that we parse and validate them
successfully.
* Handle return calls in wasm-ctor-eval (#6464)
When an evaluated export ends in a return call, continue evaluating the
return-called function. This requires propagating the parameters, handling the
case that the return-called function might be an import, and fixing up local
indices in case the final function has different parameters than the original
function.
* Update effects.h to handle return calls correctly (#6470)
As far as their surrounding code is concerned return calls are no different from
normal returns. It's only from a caller's perspective that a function containing
a return call also has the effects of the return-callee. To model this more
precisely in EffectAnalyzer, stash the throw effect of return-callees on the
side and only merge it in at the end when analyzing the effects of a full
function body.
|
| |
|
|
|
|
|
|
| |
This PR is part of a series that adds basic support for the typed
continuations/wasmfx proposal.
This particular PR adds cont and nocont as top and bottom types for
continuation types, completely analogous to func and nofunc for function types
(also: exn and noexn).
|
| |
|
|
|
|
| |
Rather than `(pop valtype*)`, use `(pop valtype)`, where `valtype` is now
allowed to be a tuple. This will make it possible to parse un-folded multivalue
pops in the new text parser. The alternative would have been to put an arity in
the syntax like we have for other tuple instructions, but that's much uglier.
|
| |
|
|
| |
Instead of e.g. `(i32 i32)`, use `(tuple i32 i32)`. Having a keyword to
introduce the s-expression is more consistent with the rest of the language.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
We previously supported (and primarily used) a non-standard text format for
conditionals in which the condition, if-true expression, and if-false expression
were all simply s-expression children of the `if` expression. The standard text
format, however, requires the use of `then` and `else` forms to introduce the
if-true and if-false arms of the conditional. Update the legacy text parser to
require the standard format and update all tests to match. Update the printer to
print the standard format as well.
The .wast and .wat test inputs were mechanically updated with this script:
https://gist.github.com/tlively/85ae7f01f92f772241ec994c840ccbb1
|
| |
|
|
|
| |
Update the legacy text parser and all tests to use the standard text format for shared memories, e.g. `(memory $m 1 1 shared)` rather than `(memory $m (shared 1 1))`. Also remove support for non-standard in-line "data" or "segment" declarations.
This change makes the tests more compatible with the new text parser, which only supports the standard format.
|
| |
|
|
|
|
| |
These type annotations were removed during the development of the GC proposal,
but we maintained support for parsing them to ease the transition. Now that GC
is shipped, remove support for the non-standard annotation and update our tests
accordingly.
|
